Item Content FW 1 Change of the Print The description on the service status page was changed from "Digital Dot Coverage" MAIN Coverage description on to "Print Coverage". status page - The coverage is simply converted with the area image ratio based on the current dot number data, and the accuracy as reference value of the toner consumption was improved. - When upgrading the firmware, the Digital Dot Coverage data will be reset due to the different way of calculation. 2 Support of ID Card ---------------------------------------- MAIN Reader (Elatec type) LAN 3 Support for language This was changed so that language selection menu can be displayed to select MAIN selection at startup language when the machine is started up for the first time. (For KMA, Central/South When turning the power ON next time, the language selected first will be set. America, KME, UTAX, After language selection: Olivetti only) - Language is set by pressing "OK" key and language selection menu will not be displayed when turning the power ON next time. --> The Quick - If pressing "Clear" key, language is set to English which is default setting, and Installation Guide for the language selection menu will be displayed when turning the power ON next time. affected destinations - If pressing "Cancel" button on the LCD, language is set to English which is was changed due to the